A-A-618A
August 25, 1986
COMMERCIAL ITEM DESCRIPTION
HANGERS, CLOTHES (WIRE) AND TROUSER GUARDS
The General Services Administration has authorized the use of this
Commercial Item Description in lieu of Federal Specification RR-H-1102.
This commercial item description covers wire clothes hangers and trouser guards, as specified.
Salient characteristics:
ITEM 1: Hangers. Wire used for the complete hanger shall be steel, minimum diameter 0.0895 inches. Hangers shall be coated with enamel or lacquer. Widths of hangers shall be 15-3/4 inches minimum.
ITEM 2: Trouser Guards. Trouser guards shall be made of paperboard or chipboard, free of surface contaminants and transferable matter. They shall be designed to cover the horizontal wire hangers and be shaped to give a curved support to trousers hung thereon. Ends shall have slots to keep the guard in place. A latex or non-crystalline abrasive strip shall be applied along the longitudinal axis of the guard, equidistant from both edges. Overall length of the guards, including the two end locks, shall be 16-3/4 inches minimum. The grooved dimension shall be 15-1/4 inches minimum to 15-1/2 inches maximum.
Workmanship. Hangers shall be free from any splinters, sharp edges, projections, or other defects that might snag or tear garments. Surfaces shall be free from flaws, cracked or peeling enamel or lacquer, and other defects which impair serviceability or appearance. Trouser guards shall be cleanly cut and free from defects that would impair appearance or serviceability.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business